Publicidad
Idiomas disponibles
Idiomas disponibles
1 Remove the fens cap, shoulder strap, filter, etc.,
2 Attach a charged battery pack (1) and a video
from the video camera recorder.
cassette (2).
If you use a wide conversion lens (not supplied),
attach it as well (except for CCD-FX models, see
3 Attach the adaptor to the video camera recorder.
A,
Check that the position of the mounting screw plate
BN
is correct. (Sev pages 8 and 9.)
—
g&>S
Fa
4 Adjust the video camera recorder.
Refer to the operation manual of your video camera recorder.
Do nat pull out the viewfinder.
1 Set the POWER
LENS
ES.
\
Set the STANDBY
switch ty CAMERA.
switch to STANDBY.
fh
The following adjustments are needed when your video camera
3 Release automatic
recorder has the corresponding function.
adjustment mode and set te
Refer to the operation manual of the video camera recorder for details.
manual adjustment mode.
White balance
Normally set to # (outdoor).
Set to +B: (indoor) for night diving.
Shutter speed
Set where no indicator appears.
Program AE
Set where no indicator appears.
Note on CCD-FX300/FX300E/FX400/
FX400E
Turn off the indicator.
Set the focus to auto focus mode.
Publicidad
