Publicidad
Idiomas disponibles
Idiomas disponibles
English
I
.
Move
the grinder
in the proper
direction.
When using a new depressed
center
wheel
in direction
A (Fig.
2), the
wheel edge may cut into the work-
piece. In this case, grind in direction B
(Fig. 2).
Once the wheel edge is worn, the
workpiece
can be ground
in both
directions.
NOTE: The wheel provided (resinoid wheel) is rated as Class A grain and #36 grain
size. It is most suitable for heavy grinding of steel and other types of materi-
als.
6.
Adjust operation
to desired
finish.
For a fine finish, decrease
pressure by lifting slightly. Grind slowly and at the
appropriate speed.
z_CAUTION
" The revolving depressed center wheel will create air turbulence.
Do no lay grinder
down in areas of dust or dirt until it has come
to a complete stop.
12
Publicidad
