Publicidad
Idiomas disponibles
Idiomas disponibles
English
(4) Remove adjusting
keys or switches
before turning
the tool on. A wrench
or a key that is left attached to a rotating part of the tool may result in per-
sonal injury.
(5) Do not overreach.
Keep proper footing
and balance at all times.
Proper
footing and balance enables better control of the tool in unexpected
situa-
tions.
(6) Use safety equipment.
Always wear protective
glasses.
Dust mask, nonskid
safety shoes, hard hat, or ear plugs must be used for appropriate conditions.
4.
Tool Use and Care
(1) Use clamps or other practical
way to secure and support
the workpiece
to a stable
platform.
Holding the work by hand or against
your body is
unstable and may lead to lose of control.
(2) Do not force tool. Use the correct
tool for your application.
The correct
tool will do the job better and safer at the rate for which it is designed.
(3) Do not use tool if switch
does not turn it on or off. Any tool that cannot
be controlled with the switch is dangerous and must be repaired.
(4) Disconnect
the plug form the power source
before making any adjust-
ments, changing
accessories,
or storing
the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
(5) Store idle tools out of reach of children
and other
untrained persons.
Tools are dangerous in the hand of untrained users.
(6) Maintain
tools with care. Keep cutting
tools
sharp and clean.
Properly
maintained tools, with sharp cutting edges are less likely to bind and easier
to control.
(7) Check for misalignment
or binding
of moving
parts, breakage
of parts,
and any other condition
that may affect
the tools
operation,
if dam-
aged, have the tool serviced
before using.
Many accidents are caused by
poorly maintained tools.
(8) Use only accessories
that are recommended
by manufacturer
for your
model.
Accessories
that may be suitable for one tool, may become
haz-
ardous when used on another tool.
5.
Service
(t)
Tool service must be performed
only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
(2) When servicing
a tool,
use only identical
replacement
parts.
Follow
instructions
in the Maintenance
section of this manual.
Use of unautho-
rized parts or failure to follow Maintenance
Instruction may create a risk of
electric shock or injury.
6.
Never touch
moving parts.
Never place your hands, fingers or other body parts near the tool's moving parts.
7.
Never operate without
all guards
in place.
Never operate this tool without all guards or safety features in place and in proper
working
order. If maintenance
or servicing
requires the removal of a guard or
safety feature, be sure to replace the guard or safety feature before resuming
operation of the tool.
8.
Use right tool.
Don't force small tool or attachment to do the job of a heavy-duty tool. Don't use
tool for purpose not intended-for
example-don't
use circular saw for cutting tree
limbs or logs.
9. Never use a power tool for applications
other than those specified.
Publicidad
