Publicidad
Idiomas disponibles
Idiomas disponibles
C
Useful information
Failure code
U1
Communication error.
2) Specific Failure & Solution
Failure
Problem
No power supplied.
The accessorial
power board and
The LED does not
the display board
come on when unit
connected failure.
is plugged in.
The accessorial
power board is
damaged.
The display board is
damaged.
Some buttons
can't work, or the
The display board is
LED display is not
damaged.
normal.
High temperature of
the hob.
The Cooking Mode
Indicator comes on,
but heating does not
There is something
start.
wrong with the fan.
The power board is
damaged.
32
Problem
Solution
Reinsert the connection
between the display board
and the power board.
Replace the power board or
the display board.
Solution A
Solution B
Check to see if plug
is secured tightly
in outlet and that
outlet is working.
Check the
connection.
Replace the
accessorial power
board.
Replace the display
board.
Replace the display
board.
Ambient
temperature may be
too high. Air Intake
or Air Vent may be
blocked.
Check whether the
fan runs smoothly; if
not , replace the fan.
Replace the power
board.
EN
C
Useful information
Failure
Problem
• Pan Type is wrong.
• Pot diameter is too
Heating stops
small.
suddenly
during operation
and the display
Cooker has
flashes "u".
overheated;
The power board
and the display
board connected
Heating zones of the
failure;
same side ( Such
as the first and the
The display board of
second zone ) would
communicate part is
display "u" .
damaged.
The Main board is
damaged.
Fan motor sounds
The fan motor is
abnormal.
damaged.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.
33
Solution A
Solution B
Use the proper
pot (refer to the
instruction manual.)
Pan detection circuit
Unit is overheated.
is damaged, replace
Wait for temperature
the power board.
to return to normal.
Push "ON/OFF"
button to restart
unit.
Check the
connection.
Replace the display
board.
Replace the power
board.
Replace the fan.
EN
Publicidad
