Publicidad
Idiomas disponibles
Idiomas disponibles
C
Useful information
Automatic fault warnings and what to do
Trouble code
Possible fault
FF
Water inlet system failure
F5
Pressure system failure
F3
Continuous water input
F2
Inability to discharge water
F8
Heater error
F1
Overflow
FE
Faulty electronic card
F7
Overheating
F6
Faulty heater sensor
HI
High voltage failure
LO
Low voltage failure
• The installation and repairing procedures should always carried out by the Authorised
Service Agent in order to avoid possible risks. The manufacturer shall not be held liable
for damages that may arise from procedures carried out by unauthorised persons. Repairs
may be carried out by technicians only. If a component has to be replaced, ensure that only
original spare parts are used.
• Improper repairs or use of non-original spare parts may cause considerable damage and
put the user at considerable risk.
• Contact information for your customer service can be found on the back of this document.
• Function-relevant genuine spare parts according to the corresponding Ecodesign order
can be obtained from Customer Service for a period of at least 10 years from the date on
which your appliance was placed on the market within the European Economic Area.
34
What to do
Make sure the water inlet tap is open and
water is flowing.
Separate the inlet hose from the tap and
clean the filter of the hose.
Contact for service if the error continues.
Contact for service.
Close the tap and contact for service.
Water discharge hose and filters may be
clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
EN
Notes
35
EN
Publicidad
