Descargar Imprimir esta página

FLAEM NebulAir+ Manual Del Usuario página 8

Ocultar thumbs Ver también para NebulAir+:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

SYMBOLS ON DEVICE OR PACKAGING
Phthalate- and bisphenol-free
Model number
Temperature limits
Atmospheric pressure limits
Batch Code
Quality mark
INFORMATION ON RESTRICTIONS OR INCOMPATIBILITIES WITH CER-
TAIN SUBSTANCES
• Interactions: The materials used in the device are biocompatible materials and comply with statutory
regulations, however possible allergic reactions cannot be completely excluded.
• Use the medicine as soon as possible once it has been opened and avoid leaving it in the nebuliser;
once therapy has ended, do not leave the medicine inside the nebuliser and proceed with hygienic
preparation.
COMPRESSOR UNIT SPECIFICATIONS
Model:
NEBULAIR
Power supply:
Max. pressure:
Air flow to compressor:
Noise level (at 1 m):
Operation:
Dimension:
NEBULIZER TECHNICAL SPECIFICATIONS
Model:
RF7-2
RF7 nebuliser
Minimum drug capacity:
Maximum drug capacity:
Protection rating of the envelope: IP21.
(Protected against solid bodies larger than
IP21
12 mm. Protected against access with a
finger; Protected against vertically falling
drops of water).
See instructions for use
Medical device
Moisture limits
Production date
Unique device identifier
230V~ 50Hz 210VA
3.5 ± 0.5 bar
14 l/min approx
55 dB (A) approx
Continued
20(L) x 30(W) x 10(H) cm
2 ml
8 ml
8

Publicidad

loading