Descargar Imprimir esta página

Husqvarna 135R Manual De Usuario página 102

Ocultar thumbs Ver también para 135R:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 174
Maintenance schedule
Maintenance
Clean the external surface.
Examine the harness for damages.
Do a check for damages on the suspension ring.
Do a check of the throttle trigger lockout and the throttle trigger. Refer to
check of the throttle trigger lockout on page 94 .
Make sure that the cutting attachment does not rotate at idle speed.
Do a check of the stop switch. Refer to
94 .
Examine the cutting attachment guard for damages and cracks.
Make sure that the grass blade is aligned with the center. Make sure that the
grass blade is sharp and that the blade or center hole is not damaged.
Examine the trimmer head for damages and cracks. Replace if it is damaged.
Examine the handle and handlebar for damage and make sure that they are
attached correctly.
For cutting attachments with a support cup, tighten the locking screw fully.
For cutting attachments with a locknut, tighten the locknut fully.
Examine the transport guard for damage and make sure that it can be attached
correctly.
Examine the engine, the fuel tank and the fuel lines for leaks.
Clean the air filter. Replace if it is necessary.
Tighten nuts and screws.
Examine the fuel filter for contamination and the fuel hose for cracks and other
damages. Replace if it is necessary.
Examine all cables and connections.
Examine the starter and the starter rope for damages.
Examine the vibration damping units for damages and cracks.
Examine the spark plug. Refer to
Clean the cooling system.
Make sure that the bevel gear is filled to ¾ with grease.
Clean the external surface of the carburetor and the area around it.
Clean the spark plug. Remove the spark plug and do a check of the electrode
gap. Adjust the electrode gap to 0.5 mm or replace the spark plug if it is neces-
sary. Make sure that the spark plug is assembled with a supressor.
Clean or replace the spark arrestor mesh on the muffler.
Examine the clutch, clutch springs and the clutch drum for wear. Replace if it is
necessary.
102
To do a check of the stop switch on page
To do a check of the spark plug on page 104 .
Daily
Weekly
X
X
X
To do a
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
975 - 012 - 28.11.2023
Monthly
X
X
X
X
X
X
X
X
X

Publicidad

loading

Este manual también es adecuado para:

336fr