Husqvarna 135R Manual De Usuario página 105
Ocultar thumbs
Ver también para 135R:
- Manual de usuario (60 páginas) ,
- Manual de usuario (88 páginas) ,
- Manual de usuario (624 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Adjust the blade set to 1 mm (0.04 in) with the
recommended setting tool. Refer to the instructions
that come with the blade. (Fig. 91)
The engine starts but stops again
Product part to examine
Fuel tank
Carburetor
Air filter
Fuel filter
The engine does not start
Check
Stop switch.
Starter pawls.
Fuel tank.
Spark plug.
Transportation and storage
•
For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
•
Always use approved containers for storage and
transportation of fuel.
975 - 012 - 28.11.2023
Troubleshooting
Possible cause
Incorrect fuel type.
The idle speed is not correct.
Clogged air filter.
Clogged fuel filter.
Possible cause
The stop switch is in the stop position.
The starter pawls cannot move freely.
Incorrect fuel type.
The spark plug is dirty or wet.
The spark plug electrode gap is incorrect.
The spark plug is loose.
Transportation, storage and disposal
WARNING:
that is damaged. Do not try to make a bent
or twisted blade straight and use it again.
Action
Drain the fuel tank and fill with cor-
rect fuel.
Speak to your servicing dealer.
Clean or replace the air filter.
Replace the fuel filter.
Procedure
Set the stop switch to the start position.
Remove the starter cover and clean around
the starter pawls.
Let an approved service agent help you.
Drain the fuel tank and fill with correct fuel.
Make sure that the spark plug is dry and
clean.
Clean the spark plug. Make sure that the
electrode gap is correct. Make sure that the
spark plug has a supressor.
Refer to technical data for correct electrode
gap.
Tighten the spark plug.
•
Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
•
Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
Always discard a blade
105
Publicidad
