Fermax iLoft VDS Manual De Instalador Y Usuario página 45

Ocultar thumbs Ver también para iLoft VDS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

iLoft VDS
iLoft VDS
NOTE:
If there is more than one iLoft monitor in the system and a call is made to a monitor, the
rest of the monitors will show a blue led warning that the channel is busy.
Answering a call
Hands free mode:
When the call button on the Entry panel is pressed a call tone is
emitted both from the panel and on the monitor, causing the screen
to start up.
Press the
button to speak with the visitor. The audio channel
between the street and the home will be opened; operating in
hands-free mode. The communication will automatically end after
90 seconds, or at any time by pressing the
The led will remain lit (blue) for the duration of the conversation.
If communication is not established with the entry panel, the monitor
will automatically turn off after 30 seconds.
While in simplex conversation mode (press the
and release to listen).
When the call button on the Entry panel is pressed, a call tone is
emitted both from the panel and on the monitor, causing the screen
to start up. Press the
input audio channel activated. The simplex mode is indicated by the
fl ashing blue led light.
From this moment on, each time you press the
audio channel is activated (constant blue led light) and when releas-
ing it it activates the input audio channel (blue fl ashing led light) the
operation is in simplex mode. The communication will automatically
end after 90 seconds, or at any time by pressing the
disconnected the blue led will turn off.
If communication is not established with the entry panel, the monitor
will automatically switch off after 30 seconds.
Manual Monitor Activation (Auto-Start)
With the monitor on standby, press and hold this button
image appears (less tha 2 seconds).
If there is more than one camera in the installation, to view the second
camera's image you must release the button and re-press it until the
second camera's image appears.
To activate the audio and speak to the visitor or open the door, follow
the steps above.
If communication is not established with the entry panel, the monitor
will automatically switch off after 30 seconds.
button to talk to the visitor, leaving the
button.
button to speak
button, the output
button.
Once
until the
Page 21

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido