Iloft Monitor; Buttons - Fermax iLoft VDS Manual De Instalador Y Usuario

iLoft VDS iLoft VDS

iLOFT MONITOR

Buttons

Buttons
Audio Activation, Call Hang-Up and Confi guration Settings Button (menu).
· Upon receiving a call,
this time the red led light will turn off, informing you that a call is pending),
to talk to the visitor. The audio channel is opened from street entrance to residence,
(the blue led lights up indicating a conversation with the street entrance, and everything said
will be heard by it)
· Press after fi nishing the communication,
and the red light is turned on).
Note: The default internal timer for the monitor is 90 seconds.
· With the monitor on standby, press and hold this button for 1 second to go into User
confi guration mode. See the «Programming: User Menu» section
Notes:
- The conversation is private, no other terminal can hear it.
- «Hands free» mode is default mode.
- While the audio channel is open the input audio can be adjusted. See the
corresponding chapter on: «Audio Adjustments»
- If the monitor is confi gured to «simplex mode», (press to speak and release to listen),
it is indicated with a fl ashing blue led light, activating the input audio channel. From
this moment on, each time you press the MENU key, the output audio channel is
activated (constant blue led light) and when releasing it it activates the input audio
channel (blue fl ashing led light). To end a conversation, short-press the MENU key.
Led
(you have 30" to respond before it returns to standby mode. During
, this is in hands-free operating mode.
(when fi nished the blue led light again turns off
press this button
Page 19