VEVOR D520S-A Manual De Instrucciones página 11

F5 -- hours F6 -- minutes F7 -- seconds
◆WASH KEY
Press wash key " ", the "CLEAR" icon light and the beater starts to work.
It will be closed when you press it again.
◆STANDBY KEY
Press standby key，"STANDBY"and"FRESH"icon will light. The little
compressor for hopper is controlled by setting temperature. It will stop
when the temperature is less than the setting value, and it will start again if
the tempreature in hopper raise for 2℃. When the temperature in cylinder
is less than the setting value, the big compressor stops, after 15 seconds
the beater motor stops. When the tempreature in cylinder raise for 2℃, the
beater motor start, after 3 seconds the big compressor starts. The
temperature of hopper and freezing cylinder can be directly displayed on
the screen.
◆AUTO KEY
Press standby key，"AUTO"and"FRESH"icon will light. The little
compressor for hopper is controlled by setting temperature. It will stop
when the temperature is less than the setting value, and it will start again if
the tempreature in hopper raise for 2℃. The big compressor for cylinder
will stops when the hardness value reach 99，after 15 seconds the beater
motor stops. The beater motor will starts again when the time goes for
setting value(cycle time to restart for machine). After 3 seconds the big
compressor starts.
PROTECTION FUNCTION
◆
• The sensor for freezing cylinder is open circuit or short cirult, hardness
window on the screen will show"RL"or"RH", the buzzer will screams and
the machine stop.
• The sensor for mix hopper is open circuit or short cirult, hardness window
on the screen shows "RL"or"RH", the buzzer screams, and the machine
- 10 -