Decathlon E-ACTV500 2023 Instrucciones De Uso página 18

20
Power measurement error
21 / 23 Temperature sensor error
24 / 25
Abnormal current or voltage
26 Program reboot error
30
Walk mode error
40 / 41 Motor power surge
42 / 43
Motor error or short circuit
44 Motor overheating
45
Error corrected during use
46 Motor not operating
60 Controller communication/screen error
70 Torque sensor error
71 Pedalling not detected
72 Force applied to the pedal not detected
73 Torque sensor error
80 Incorrect motorized unit settings
81 Switch off and restart the bicycle.
82 Program manipulation
83 Motorized unit program error
84 Wrong motor parameter
200 Torque sensor over voltage
201 Torque sensor under voltage
202 Cadence sensor error
Switch off and restart the bicycle.
Charge the battery.
Allow the motor to cool by pedalling more gently or lowering the assistance mode.
Check that the motor connections are properly plugged in.
Restart the bike.
Allow the motor to cool by pedalling more gently or lowering the assistance mode.
In the event of a broken spoke, contact your DECATHLON store.
Check the integrity of the battery, in the event of a crash or if the battery falls off.
In the event of a broken spoke, contact your DECATHLON store.
Check the integrity of the battery, in the event of a crash or if the battery falls off.
Check that the screen connections are securely inserted at the handlebars.
Switch off and restart the bicycle.
/
Switch off and restart the bicycle.
18