Publicidad
Idiomas disponibles
Idiomas disponibles
To achieve
proper
drying,
always
use a liquid rinse
agent,
even
if your
detergent
contains
a rinse agent or drying additive.
Rinse Agent
Dispenser
Open the rinse agent dispenser
by lifting the tab with your thumb.
NOTE:
The dishwasher
indicates low rinse agent
either
by showing
the
symbol
_
in the countdown
display,
or illuminating the refill rinse agent
4A%
light (model dependent).
Add liquid rinse
agent
to the dispenser
as shown
until the rinse
agent
reservoir
is full. Wipe
up any excess
rinse agent that puddles
when
the
dispenser
reservoir
is full.
Setting
amount
of rinse-aid
The amount
of rinse-aid
dispensed
can be set from "r:00" to "r:06".
,
Open the door (for hidden controls
only).
,
Turn unit on by pressing
the ON/OFF
button.
,
Hold down button [A] (see page 4) and press START until the display
indicates "H:00"
,
Release
both buttons.
,
Press [A] button until the display indicates "r:05".
,
Press [C]to select the desired
setting.
,
"r:00" means the Rinse Agent dispenser
is off.
,
"r:01" means the Rinse
,
"r:02" means the Rinse
,
"r:03" means the Rinse
,
"r:04" means the Rinse
,
"r:05" means the Rinse
.
"r:06"
o
o
Agent dispenser
is at the lowest setting.
Agent dispenser
is low setting.
Agent dispenser
is medium
setting.
Agent dispenser
is medium
high setting.
Agent dispenser
is high setting.
means the Rinse Agent dispenser
is at the highest setting
Save the selected
setting
by pressing
the START
button.
Close the door (for hidden controls
only).
Switching
off rinse-aid
refill
indicator
,
Set the rinse aid option to r:00
NOTE: Do not change the amount of rinse-aid unless there are streaks (select
lower setting) or water stains (select higher setting) visible on the utensils,
Publicidad
