Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Carrier
Installation Carrier / Installationsträger / Partie porteuse / Soporte de instalación /
Suporte de Instalação / Installatiedrager / Supporto di installazione / Powierzchnia
montażowa / Nosič instalace / Installationsfästen / Suport instalație / Монтажна
основа / Monteringsholder / Μεταφορέας εγκατάστασης / Paigalduskandja /
Asennusteline / Nosač za ugradnju / Telepítési szolgáltató / Montavimo pagrindas /
Instalācijas turētājs / Nosná konštrukcia pre inštaláciu / Namestitveni nosilec / Kurulum
Taşıyıcı / Transportador de Instalação / حامل التثبيت
Fire resistant
* A cement wall is required for the installation of X3-IES system. If you choose wall mounting, please make sure that
the thickness of any section of the wall is greater than 150 mm. When choosing floor mounting, the wall thickness
should be larger than 100 mm.
Net weight and dimensions of X3-IES system
One Tower
Net weight [kg]
Dimension [mm]
Two Towers
Net weight [kg]
Dimensions [mm]
Net weight [kg]
Dimensions [mm]
* Note:
1. The maximum net weight (37kg) of an inverter is taken as an example. Please refer to
the specific weight of inverters of different powers when considering the weight of the left
tower.
2. Please consider the distance between the left and right tower under limited installation
space.
112
Option A
144.2
730 × 1281 × 209.5
730 × 1599 × 209.5
Option D
Left Tower
144.2
730 × 1281 × 209.5
730 × 809 × 150
Option F
Left Tower
144.2
730 × 1281 × 209.5
730 × 1127 × 150 730 × 1599 × 209.5
Be suitable for the
dimensions and weight
of X3-IES system.
Option B
191.2
730 × 1917 × 209.5
Right Tower
Left Tower
100.5
730 × 963 × 209.5
Right Tower
Left Tower
147.5
191.2
Option C
238.2
Option E
Right Tower
97.2
147.5
730 × 1127 × 150
Option G
Right Tower
147.5
730 × 1127 × 150
Publicidad
