SOLAX X3-IES-4K Manual De Instalación página 166

• Meter / CT Connection
Remove the waterproof plug.
11
Insert the assembled communication cable into
12
the Meter/CT port and then tighten the swivel nut.
* When you choose to connect a meter, connect the communication cable from the
inverter to the Meter/CT port of X3-Matebox G2 without a meter connected in between.
* When you choose to connect CTs, connect CTs on the communicatoin cable from the
Meter/ CT port of the inverter.
• Grid and Load Connection
14
162
1) White with orange stripes
2) Orange
3) White with green stripes
4) Blue
5) White with blue stripes
6) Green
7) White with brown stripes
8) Brown
13
Connect the communication cable from the
inverter to the Meter/CT port of the matebox.