SOLAX X3-IES-4K Manual De Instalación página 133

8
Step 2 Install the BMS
Attach the two brackets with a screw,
9
but do not tighten it for a while.
Align the holes on the positioning cardboard
11
with dots close to the battery on the wall.
Step 7
Align the brackets with the holes on the battery module. Mark
10
four dots through the brackets on the wall.
12
Steps 6
Please refer to the Step 6 to 7 of
to 7
the Wall Mounting to install the
two battery modules.
Mark dots where "X3-IES" is noted on the
positioning cardboard.
M5 * 14
129