SOLAX X3-IES-4K Manual De Instalación página 134

13
14
Knock expansion tubes into the wall with a rubber hammer.
8-10 N·m
M5 * 14
2.2-2.5 N·m
15
130
Tapping screw
Drill holes at the depth of more than 60 mm
with a Ø10 drill.
*Note: An electric drill dust collector is
recommended to prevent dust from being
released into the hot plug when drilling
holes.
Ø10 drill
Depth: >60 mm
Tighten screws on
both sides.