SOLAX X3-IES-4K Manual De Instalación página 139

• Matebox Mounting / Montage der Matebox / Assemblage de la Matebox/ Montaje
Matebox / Montagem da Matebox/ Matebox montage/ Montaggio del Matebox
/ Mocowanie Matebox/ Uchycení Mateboxu / Montering av Matebox / Instalarea
Matebox / Монтаж на Matebox / Samling af Matebox / Εγκατάσταση του Matebox
/ Mateboxi paigaldus / Mateboxin kokoonpano/ Montaža mateboxa / A Matebox
Felszerelése / Matebox montavimas / Installēšana Matebox / Inštalácia Mateboxu /
Namestitev Matebox / Matebox Montajı / Montagem do Matebox / Matebox ‫بيكر‬
360 mm
290 mm
1
4
* When drilling holes, make sure the already installed part is covered to prevent dust from
falling onto the device.
* Note:
1. "Matebox" refers to X3-Matebox G2.
2. The horizonal distance between X3-IES and X3-Matebox G2 should be no more than
100 cm.
3. For the height of X3-Matebox G2, the bottom of the ports of X3-Matebox G2 should be
a little bit higher than the outlet of the inverter.
2
3
ST6
5
2±0.1 N·m
Ø 10 drill bit
Depth: > 60 mm
135