SOLAX X3-IES-4K Manual De Instalación página 125

17
18 Knock expansion tubes into the wall with a rubber hammer.
As for
securing
brackets, refer
to Step 9.
19
Drill holes at the depth of more than 60 mm
with a Ø10 drill.
*Note: An electric drill dust collector is
recommended to prevent dust from being
released into the hot plug when drilling
holes.
Ø10 drill
Depth: >60 mm
*Note: 1. An electric drill dust
collector is recommended.
2. To prevent dust from being
released into the hot plug when
drilling holes, users may use the
package bag of the device or
other materials to fully cover the
battery module.
3. Please make sure that the
corners and edges of the battery
modules are aligned before
tightening screws.
121