Bresser 9652200 Manual De Instrucciones página 23

3 Locking screw (holder)
5 Digital microscope
7 Record button
9 LED ring lighting
11 Protection cap
13 USB-A connector
Scope of delivery:
Digital microscope (A) with USB cable, microscope stand (B)
11 Assembling the microscope
For the assembly proceed as follows:
Snap the microscope into the center of the clamp on the
stand.
12 Power supply
Plug the USB-A connector of the USB cable into a free USB
port of the PC. The power is supplied through the computer
after it has been switched on. The LED ring lighting will light
up.
13 Adjusting the lighting
The digital microscope is equipped with a LED ring lighting
for optimal object illumination and can be dimmed.
1.
2.
Connect the digital microscope to the PC.
The brightness of the lighting can be adjusted by press-
ing the dimmer button
4 Stand
6 Dimmer button
8 Zoom wheel (50x to 1000x)
10 Objective
12 USB cable
several times.
23 / 104