Bresser 9652200 Manual De Instrucciones página 24

14 Connecting to a PC
Use of this digital microscope requires a connection via USB
to a PC running the Windows operating system (Windows 7
or above) or macOS (10.13 or above). Follow the steps below
for proper connection:
1.
2.
3.
4.
5.
*Info about downloading the software can be found on page 2
in this manual.
15 Adjust stand
Depending on the size of the observation object or when
changing the magnification setting, the position of the mi-
croscope head must be adjusted in height. To do this, pro-
ceed as follows.
1.
2.
24 / 104
Download and install the HiView* software on the PC.
Mount the digital camera as described.
Insert the USB-A plug of the USB connection cable into
a free USB port of the PC. If the connection is success-
ful, the LED lights up. The digital microscope is ready
for use.
Via the HiView* software, the images from the digital
microscope can be viewed and saved. Furthermore, the
images can be labeled and measured.
In the software, click on "Device" and then on "Open".
Connect to the digital microscope found there (click on
"Open"). If you have started the software first and then
connect the digital microscope, you must click on "Re-
fresh" so that the digital microscope can be found.
Carefully loosen the locking device on the side.
Set the desired new alignment and lock the locking
screw again.