Publicidad
Idiomas disponibles
Idiomas disponibles
installation guide
Always use two people when setting up the base .
STEP 1
Place the bed base box in a desired location with the top of the
box facing up .
Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects .
STEP 2
Remove the bed base from the box . Unfold the bed making
sure to keep the bottom of the bed facing upwards .
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
8
STEP 3
To install Headboard Brackets, see instructions on page 16.
Legs are shipped fully assembled . Alternative heights in 3"
increments can be achieved by removing leg segments .
To install the legs, thread the washer over the screw on the leg .
Next, screw the leg into the nutsert on the frame . Do not over
tighten.
STEP 4
To sync two bases see detailed installation
instructions on pages 13-14.
Locate the battery backup strap and set it aside . Be sure that it is
accessible after the base is set up, in case of an emergency power
outage .
Publicidad
