Publicidad
Idiomas disponibles
Idiomas disponibles
EngLIsh
DIGITAL TORQUE TESTER
E.2000-5A
Congratulations!
You have chosen a FACOM tool. Years of experience, thorough
product development and innovation make FACOM one of the
most reliable partners for professional power tool users.
Technical Data
E.2000-5A E.200-50A E.2000-350A E.2000-1000A
Voltage
Accuracy*
1/4''
Drive size
0.5-5 Nm
Torque range
.4-4 ft-lb
Communication
Operation Mode
Unit Selection
Operating
Temperature
Storage
Temperature
Humidity
Units
Electromagnetic
Compatibility
Test**
* The accuracy of the readout is guaranteed from 10% to 100% of maximum
torque +/- 1 increment. The torque accuracy is a typical value. For keeping the
accuracy, calibrate the torque tester for a constant period time (1 year).
** Electromagnetic Compatibility Test:
a. Electrostatic Discharge immunity (ESD)
b. Radiated Susceptibility (RS)
c. Radiated Emission (RE)
a
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
12
AC:100-240V at 50-60Hz input
DC:12V output
+/- 1% or within +/- 3 digit CW
3/8''
1/2''
27mm (male)
5.0-50 Nm
35-350 Nm
100-1000 Nm
4-37 ft-lb
26-258 ft-lb
74-738 ft-lb
Yes. USB cable supported
Peak hold/Track/First peak
N-m, in-lb, ft-lb
5 ° C - 40 ° C
(41 ° F - 104 ° F)
-20 ° C - 70 ° C
(-4 ° F - 158 ° F)
Up to 90% non-condensing
N-m, ft-lb, in-lb
Pass
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
SAFETY INSTRUCTIONS
When using an electrical torque tester, basic precautions should
always be followed, including the following:
READ ALL
INSTRUCTIONS
BEFORE USING
THIS TORQUE TESTER
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock, fire
and/or serious injury.
WARNING: Do not attempt to modify or repair the torque
tester.
WARNING: To reduce the risk of fire, electrical shock
or injury:
•
Shock Hazard. To protect against risk of electrical shock, do
not put charging base in water or other liquid.
•
Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
•
Use only as described in this manual. Use only
manufacturer's recommended attachments.
•
Do not put any object into openings. Do not use with any
opening blocked; keep free of dust, lint, hair, and anything that
may reduce air flow.
•
Do not incinerate the torque tester even if it is severely
damaged. The batteries can explode in a fire.
Additional Safety Warnings
a ) This torque tester is intended for professional,
commercial or industrial use only.
b ) Do not use a battery or torque tester that is
damaged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
c ) Do not expose a battery or torque tester to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C (266 °F) may cause explosion.
d ) Have servicing performed by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product is maintained.
SAVE THESE INSTRUCTIONS
Publicidad
