Publicidad
Idiomas disponibles
Idiomas disponibles
Additional Safety Rules for Torque
Torque Testers
WARNING:
•
ALWAYS use safety glasses. Everyday eyeglasses are NOT safety
glasses. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA Z94.3)
•
Do not use the unit outdoors. Unit intended for indoor use only.
•
ALWAYS ensure accessories are not chipped or damaged to
reduce the risk of loose debris causing injury.
•
Do not expose to excessive heat or humidity to avoid
deformation or corrosion, which may affect accuracy.
•
Do not use this torque tester in water since fluid ingress will affect
the circuitry resulting in damage and potentially electrical shock.
•
NEVER use on live electrical circuit, torque tester does not
protect you from electrical shock. Turn off power before use.
•
Over torque (exceeding stated maximum capacity by 110%
can result in damage, breakage or affect accuracy).
•
Avoid use of solvents, chemicals, liquids.
•
Do not attempt to disassemble or repair. Refer to an authorised
service centre.
•
Guard against snagging of clothing, hair, jewellery or anything
that could impair movement of the product or work piece and
lead to damage or injury.
•
Over-torquing (110% of maximum torque range) could cause
breakage or impede accuracy.
•
Do not shake violently or drop torque tester.
•
Do not use this torque tester as a hammer.
•
Do not leave this torque tester in any place exposed to
excessive heat, humidity, or direct sunlight.
•
Do not use this apparatus in water, as it is not waterproof.
•
If the torque tester gets wet, wipe it with a dry towel as soon as
possible. The salt in seawater can be especially damaging.
•
Do not use organic solvents, such as alcohol or paint thinner
when cleaning the torque tester.
•
Keep this torque tester away from magnets.
•
Do not expose this torque tester to dust or sand as this could
cause serious damage.
•
Do not apply excessive force to the LCD panel.
•
Apply torque slowly and grasp the center of the handle. Do not
apply load to the end of the handle.
CAUTION:
•
Hard impacts or dropping the torque tester may impair
accuracy of the torque tester. If the torque tester is
dropped or receives a sharp impact have the torque tester
accuracy checked.
•
To ensure correct operation and accuracy this product must be
calibrated periodically in line with standards.
SAVE THESE INSTRUCTIONS
Residual Risks
WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
•
Impairment of hearing.
•
Risk of personal injury due to flying particles.
•
Risk of burns due to accessories becoming hot
during operation.
•
Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Package Contents
The package contains:
1 Torque tester
1 AC/DC power adapter
1 USB connector
1 Declaration of conformance
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Date Code Position (Fig. A)
The date code
15
, which also includes the year of manufacture,
is printed into the housing.
Example:
2022 XX XX
Year and Week of Manufacture
Description (Fig. A)
WARNING: Never modify the tool. Damage or personal
injury could result.
Communication port
1
AC/DC power port
2
AC/DC power adapter
3
AC/DC power plug
4
LCD screen
5
LED indicators
6
System reset button
7
Power on/clear button
8
Target/Tolerance/Idle sleep setting/Over torque display
9
Unit switch button
10
Mode selection button
11
Zero reset Button
12
Drive sensor
13
Intended Use
Your FACOM Digital Torque Tester is designed for checking
the accuracy of hand operated torque setting tools, such as
mechanical 'click' wrenches, electronic torque wrenches and dial
gauge torque wrenches.
EngLIsh
13
Publicidad
