Publicidad
Idiomas disponibles
Idiomas disponibles
During charging, the LED lights
and start to blink slowly.
4. The LED lights will become solid blue when the product
is fully charged. Unplug the USB wall adapter from the
wall socket and disconnect the USB cable from the
product.
3 Cleaning
NOTICE! RISK OF DAMAGE!
• Do not use any aggressive cleaners,
brushes with metal bristles, or sharp or
metallic cleaning utensils such as knives,
hard scrapers, and the like.
Clean the product after each use.
1. Remove the attached grinding disc
product. If necessary, use the handle of the cleaning
to aid the removal (see step 1 in Fig. B).
brush
12
2. Turn the fixing ring
from the product (see Fig. D).
3. Remove the filter
Fig. D).
4. Clean these parts accordingly:
Main body: Wipe it off with a damp cloth. Then wipe
it completely dry with a dry cloth.
Dust chamber and grinding discs: Use the
cleaning brush to remove the dust accumulated on
them.
Filter, fixing ring and cover
under running water. Wipe the fixing ring and cover
completely dry with a dry cloth and let the filter air dry
8
counterclockwise to detach it
5
from the dust chamber
6
will become blue
from the
4
10
: Clean them
3
EN
(see
12
Publicidad
