Descargar Imprimir esta página

Simpson IR61094 Manual De Uso Y Cuidado página 15

Ocultar thumbs Ver también para IR61094:

Publicidad

Idiomas disponibles

Idiomas disponibles

Location
IT IS NOT RECOMMENDED TO USE AN EXTENSION CORD. If, however, an extension
cord is required, it must be an OUTDOOR RATED 3-PRONG CORD, that is no longer
than 50 feet (15M) and has a minimum of 14 AWG (2.5mm
the extension cord when in use. DO NOT use an extension cord that has its ground pin
damaged or missing.
Operating Conditions
Before each use, check for loose or damaged parts, leaks, and/or any other condition
that may affect proper operation. Repair or replace all damaged and/or defective parts
immediately. Always keep all safety guards in place and in proper working order. For safety
reasons, the manufacturer recommends all maintenance and repairs be performed by an
authorized service center.
Before using the pressure washer, remove any excessive dirt and debris from the cooling
vents of the motor. Always operate the pressure washer on a level surface and never move
or tip the pressure washer while operating. Use the pressure washer only for its intended
purpose. If you have questions about the proper use of your pressure washer, please
contact customer support at 1-877-362-4271 or cservice@fna-group.com.
Untrained adults and children can be seriously injured or killed if allowed to incorrectly
operate or play with running pressure washer. To avoid these hazards, be sure anyone
operating the pressure washer receives proper instructions, understands safe operation,
and has read the owner's manual before operating this product. Do not let children
operate the pressure washer without parental supervision. Keep children and pets away
from the pressure washer while it is running. Always turn off the pressure washer before
leaving the area.
Failure to inspect this product before use could create a hazardous situation resulting
in product damage, serious injury, and/or death. To avoid these hazards, inspect the
pressure washer before each use. Check for loose or damaged parts, signs of oil leaks,
missing guards, plugged cooling vents, or any other condition that may affect proper
operation. Repair or replace all damaged or defective parts and keep all safety guards in
place and in proper working order before using the pressure washer.
Page 13
OPERATING CHECKLIST
WARNING:
WARNING:
WARNING:
WARNING:
2
) conductors. Always uncoil
UNTRAINED OPERATION
INSPECT BEFORE OPERATING

Publicidad

loading

Este manual también es adecuado para:

Ir1520012a