Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Plug the electrical power cord into a grounded 5-15R receptacle, that was properly
installed in accordance with all local codes and ordinances.
6. Test the GFCI using the following steps. NOTICE - DO NOT use the
pressure washer if the below tests fail.
A). Press the TEST button.
The indicator light should
now be dark (OFF).
7. Turn the pressure washer ON.
9. Point the spray gun in a safe direction, open the trigger lock and squeeze the trigger.
Page 15
B). Press the RESET button.
The indicator light will now be
illuminated (ON).
Press the master ON/OFF button to
turn the pressure washer on.
Publicidad
