Descargar Imprimir esta página

DURAVIT SensoWash u 622000 01 1 00 1300 Manual De Uso página 20

Asiento de lavado integrado

Publicidad

Idiomas disponibles

Idiomas disponibles

5.2
Open and close the cover
NOTE
Damage to the seat unit
Interrupting the current mechanical opening and closing of the cover can cause
damage to the product.
> Do NOT interrupt the mechanical opening and closing of the cover with manual
force.
The cover can be opened and closed by remote control or the app.
5.3
Set the user profile by remote control
Personal preferences can be stored in various user profiles.
> Activate the Rearwash/Ladywash.
> Set the spray wand position, water spray intensity and water temperature while the
function is active.
The LEDs on the remote control indicate the settings.
> Press the user profile 1/2/3/4 for 3 seconds to save the profile.
TIP
The seat has a sensor. Shower and drying functions can only be activated
when a user is sitting on the toilet.
5.4
Energy and water efficiency
To minimize the consumption of natural resources, the product has an instant heating
system and an auto-stop function for all shower and drying functions. The following
settings can be adjusted to save energy in daily use:
5.4.1 Energy saving mode (seat heating)
Deactivates the seat heating for a specified period of time, e.g. during daytime, while
at work. The seat heating is then reactivated.
> Activate energy saving mode via the app. [}App] Menu – Settings – Seat
5.4.2 Holiday mode
If the product is not to be used for two weeks or more, empty the product and switch
it off.
> Close the stop valve to interrupt the water supply.
> Activate holiday mode via the app. [}App] Menu – Care – Holiday mode
> Disconnect the power supply.
> Remove the batteries from the remote control.
20

Publicidad

loading