Sime ECOMAXI VB 300 S Instrucciones De Instalación Y Funcionamiento página 45

A
B
C
D
Note: All the pictures in this manual are for explanation purpose only. They may be slightly different
from the appliance you purchased (depend on model). The actual appearance shall prevail.
■ Basic Installation Tools and Materials Needed
Name
Pipe wrench
Straight screwdriver,
Phillips screwdriver
Wire scissor or stripper
Ball valve
Water pipe, Flexible joint
Hot water pipe,
Insulation material
■ Installation Instructions
1. Appliance Moving
● This appliance is quite heavy so that it requires two or more people to move and install, or it may
cause in personal injury or otheraccidents.
● Please transfer the appliance as its delivery status, do not disassemble it by yourself.
● In order to avoid scratches and deformation on the surface, please add protection board over the
surface of the appliance where may contact hard objects directly.
● Be careful not to touch the fan with your hand or other objects.
●Do not transfer the appliance with inclination over 45°. Do not lay down the appliance on the floor.
ECOMAXI VB 200
ECOMAXI VB 300
ECOMAXI VB 300 S
ECOMAXI VB 200
ECOMAXI VB 300
ECOMAXI VB 300 S
ECOMAXI VB 200
ECOMAXI VB 300
ECOMAXI VB 300 S
ECOMAXI VB 200
ECOMAXI VB 300
ECOMAXI VB 300 S
QTY
2 pcs
1 pc per each
1 pc
1 pc
Depend on the actual need
Depend on the length of
the hot water pipe
6
990mm
1430mm
1430mm
1530mm
1970mm
1970mm
836mm
1250mm
1250mm
255mm
255mm
255mm
Usage
To connect the water pipes.
To disassemble the housing
cover and connect wires.
To trim thread and strip wire.
To connect the tank inlet water pipes.
Choose PPR pipes or PAP pipes.
To insulate.