Qilive Q.5476 Manual De Instrucciones página 7

2. TECHNICAL SPECIFICATIONS
Power supply
Rated power
Suction power levels
Dustbag capacity
Dustbag dimensions
Dustbag collar size
Cable length
Noise level
Dimensions (W x D x H)
Net weight
Gross weight
3. PRODUCT DESCRIPTION
1. Carrying handle
2. Suction opening
3. Dust compartment lid
4. Full dustbag indicator
5. Suction power button (increase)
6. Footswitch for automatic cable rewind
7. Air outlet
8. On/Off footswitch
9. Floorhead holder
10. Suction power button (decrease)
11. Suction power indicators
4. CONNECTION AND ADJUSTMENT
4.1. ATTACHING THE SUCTION HOSE
Insert the hose connector into the suction opening on the vacuum cleaner and turn it clockwise
•
until it locks into place.
If you want to remove the suction hose, turn the hose connector anticlockwise and pull the
•
connector out of the suction opening.
4.2. CONNECTING THE HANDLE TO THE SUCTION TUBE
Push the handle attached to the other end of the suction hose into the suction tube and turn it
•
clockwise or anticlockwise until it clicks into position.
If you want to separate the two pieces, press and hold the release button on the suction tube
•
and pull out the handle at the same time.
4.3. ADJUSTING THE TELESCOPIC SUCTION TUBE
One section of the telescopic suction tube is packed inside the other. You can lengthen or shorten
the suction tube to suit your height for comfortable vacuuming.
220-240 V~, 50-60 Hz
700 W
4
3 L
240 x 200 x 130 mm
110 x 100 mm
7 m
64 dB
460 x 328 x 255 mm
7.65 kg
8.9 kg
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
7
Wheel
Base
Dust compartment lid locking lever
Suction hose (with handle connected)
Telescopic suction tube
Floorhead
Crevice nozzle
Dusting nozzle
Upholstery nozzle
Accessory holder
EN