Publicidad
Idiomas disponibles
Idiomas disponibles
EN-26
4.9 COM Menu
Enter this menu to define communication parameters.
Reset:
Baud Rate:
Parity:
Stop bit:
Handshake:
Alternate command:
End COM:
Reset [reset]
Reset the COM menu to factory defaults.
NO
= no reset
YES
= reset
Baud Rate [BAUD]
Set the baud rate.
300
= 300 bps
600
= 600 bps
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
Parity [paritY]
Set the data bits and parity.
7 EVEN
= 7 data bits, even parity
7 ODD
= 7 data bits, odd parity
7 NONE
= 7 data bits, no parity
8 NONE
= 8 data bits, no parity
Stop bit [stOP]
Set the number of stop bits.
1
= 1 stop bit
2
= 2 stop bits
Handshake [HaNdSH]
Set the flow control method.
NONE
= no handshaking
ON-OFF
= XON/XOFF software handshaking
no, yes
300...9600...19200
7 even, 7 odd, 7 none, 8 none
1, 2
none, On-Off
Print (A...P...Z), Tare (A...T...Z), Zero (A...Z)
Exit menu
Ranger™ 2000 Series
Publicidad
