Publicidad
Idiomas disponibles
Idiomas disponibles
EN-6
The colored LED indicators on the left side of the control panel are used in Check
mode (section 3.6) and will light up according to the following rules:
(Red) Loads > Upper limit
(Green) Loads ≥ Lower limit and ≤ Upper limit
(Yellow) Loads < Lower limit
3.2 Turning Scale On/Off
To turn the scale on, press and hold the On/Zero Off button for 1 second. The
scale performs a display test, momentarily displays the software version, and then
enters the active weighing mode.
To turn the scale off, press and hold the On/Zero Off button until OFF is displayed.
Figure 3-4. Below view of Ranger 2000
Ranger™ 2000 Series
Lock Switch
Power Input
Weigh Below
Access
RS232
Interface
Port
(below cover)
Publicidad
