OHAUS Ranger 2000 Serie Manual De Instrucciones página 30

EN-28
4.10 Lock Menu
The Lock menu is a software controlled option which can lock menu settings to
prevent tampering.
Reset:
Lock Cal:
Lock Setup:
Lock Read:
Lock Mode:
Lock Unit:
Lock Print:
Lock COM:
End Menu Lock:
Reset [reset]
Reset the Lock menu to factory defaults.
NO = no reset
YES = reset
Lock Cal [l.CAL]
Set the status.
OFF = Calibration menu is not locked.
ON = Calibration menu is locked.
Lock Setup [l.SEtuP]
Set the status.
OFF = Setup menu is not locked.
ON = Setup menu is locked.
Lock Read [l.rEAD]
Set the status.
OFF = Readout menu is not locked.
ON = Readout menu is locked.
Lock Mode [l.mMod]
Set the status.
OFF = Mode menu is not locked.
ON = Mode menu is locked.
Lock Unit [l.Unit]
Set the status.
OFF = Unit menu is not locked.
ON = Unit menu is locked.
Lock Print [l.Print]
Set the status.
OFF = Print menu is not locked.
ON = Print menu is locked.
no, yes
off, on
off, on
off, on
off, on
off, on
off, on
off, on
Exit menu
Ranger™ 2000 Series