GRAPHITE 58G227 Instrucciones De Uso página 16

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
NOTE: BEFORE YOU START TO USE THE DEVICE, MAKE SURE YOU READ THIS INSTRUCTION CAREFULLY AND
KEEP IT FOR FUTURE USE.
●
When working with the power tool, wear hearing protectors.
loss.
●
Use the tool with the additional handles provided with it.
of the operator.
●
Do not change the direction of rotation of the spindle when the spindle is in motion.
the power tool may become damaged.
ADDITIONAL RULES FOR SAFE WORK WITH THE DRILL/DRIVER
●
Use only the recommended battery and charger.
●
Always keep the battery away from a source of fire. Do not leave the battery for extended periods in
hot places (places exposed to direct sunlight, near radiators, or any other places where the temperature
exceeds 50 C).
o
●
The battery charging time may not exceed 8 hours; otherwise, the battery may become damaged.
●
Avoid charging the battery at temperatures below 0
●
The charger supplied with the drill/driver is intended to be used only with this product. Do not use it
for any other purposes.
●
Do not insert any metal objects into the charger.
●
Do not change the direction of rotation of the spindle when the spindle is in motion. Otherwise, the
drill/driver may become damaged.
●
Clean the drill/driver with a soft, dry cloth. Never use any detergents or alcohol.
●
Before cleaning the charger, disconnect it from the power supply.
●
If you intend to charge more than one battery, make a 30-minute break before you start charging the
next one.
●
Batteries may be charged only if they are discharged.
●
Never charge batteries after using the drill/driver for only a short time.
SPECIAL SAFETY CONDITIONS FOR THE CHARGER
●
Keep this instruction. It contains important safety and operation instructions for the charger.
●
Before using the charger, make sure to read all the relevant information contained in this instruction, as
well as the labels on the charger and on the product for which the charger is intended.
●
In order to reduce the risk of a possible injury, use the charger only for charging Li-Ion batteries. Batteries
of other types could explode, thus causing injury or damage to property.
●
The charger may not be exposed to moisture or water.
●
Use of connectors that are not recommended or sold by the charger's manufacturer leads to a risk of
fire, injury, or electrical shock.
●
Make sure that the power cord may not be stepped on, is lot located in a passage, and is not exposed to
other risks (e.g. excessive pulling forces).
●
An extension cord should be used only when absolutely necessary. Use of improper extension cords
leads to the risk of a fire or electrical shock. If an extension cord must be used, first make sure that:
- the extension cord's socket matches the pins of the original power cord of the charger; and
CORDLESS DRILL/DRIVER
58G227
DETAILED SAFETY REGULATIONS
16
Exposure to noise may lead to hearing
Loss of control may result in personal injury
C.
o
Otherwise,