Descargar Imprimir esta página

EVVO H20 INOX Manual De Instrucciones página 36

Horno integrable

Publicidad

ENGLISH
and confirmed.
- When the clock strikes 13:15 (between 14 -15 min), the oven will switch on automatically.
The square symbol will keep flashing during the cooking procedure.
- When the clock strikes 14:00, the oven will switch off automatically, and alarm will
sound, and the square symbol will flash. Press any of the icons to stop the alarm.
Semi-automatic configuration (automatic start and end time adjustment)
1. Adjust the cooking time (10 hours maximum).
- Touch the Function icon repeatedly until the square symbol flashes above the Start-
of- cooking icon, then adjust the baking time.
- Switch on the oven immediately: the square symbol above the Start-of-cooking icon
will flash. Once the cooking time has elapsed, the square symbol above the Start-of-
cooking icon will flash and the alarm will sound. Press any of the icons to stop the
alarm.
2. Set the end-of-cooking time (23 hours and 59 minutes maximum).
- Touch the Function icon repeatedly until the square symbol appears above the End-
of- cooking icon, then set the end-of-cooking time.
- Switch on the oven immediately: the square symbol above the End-of-cooking icon
will flash. Once the set time has elapsed, the cooking process will stop automatically,
the square symbol above the End-of-cooking icon will flash, and the alarm will sound.
Press any of the icons to stop the alarm.
- The set baking procedure can be viewed by repeatedly touching the function icon at
any time, but only if baking time is set to 0.
- You can also cancel the baking settings by setting the end-of-cooking time to the
current time.
Timer
The timer can be set up to a maximum of 23 hours and 59 minutes. To set the time,
repeatedly touch the Function icon until the square symbol above the Timer icon
flashes, then press the Increase/Decrease icon to adjust the time as desired. After
setting the timer, the time (hours and minutes) and the square symbol above the
Timer icon will start flashing and the countdown will start. Once the set time has
elapsed, the square symbol above the Timer icon will flash and the alarm will sound.
Press any of the icons to stop the alarm.
Note
In case of a sudden power failure, the settings will be reset. Upon reconnection, the
display will show '12:00' and the square symbol above the Clock icon.
Light
Turn the Cooking-mode knob to the Light position to turn on the oven light. This light
36
HORNO INTEGRABLE EVVO H20 INOX / BLACK

Publicidad

loading

Productos relacionados para EVVO H20 INOX

Este manual también es adecuado para:

H20 black