Leister LHS Serie Instrucciones De Funcionamiento página 19

Declaration of Incorporation
EU Declaration of Incorporation
(in terms of the EC machinery directive 2006/42/EC; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil, Switzerland hereby declares the partly completed
machinery
Designation:
Model:
fulfills the following essential requirements of the EC machinery directive (2006/42/EC):
1.1.1, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.1, 1.5.2, 1.6.3
The partly completed machinery furthermore complies with the provisions of the following EC directives:
EC directive(s):
Harmonized standards:
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled in accor-
dance with Annex VII (part B) and will be electronically transmitted to national authorities in response to a reasoned
request.
Name of authorized representative for documentation: Thomas Schäfer, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into which it is to be incorporated
has been declared in conformity with the provisions of the EC machinery directive (2006/42/EC), where appropriate.
Kaegiswil, 11/23/2023
UK Declaration of Incorporation
(in terms of The Supply of Machinery (Safety) Regulations 2008, Annex II 1.B)
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil, Switzerland hereby declares the partly completed
machinery
Designation:
Type:
fulfills the following essential requirements of The Supply of Machinery (Safety) Regulations 2008 (2008 No. 1597):
1.1.1, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.1, 1.5.2, 1.6.3
– as far as it is possible from the scope of supply – fulfills the applicable essential requirements of The Supply of Ma-
chinery (Safety) Regulations 2008 (2008 No. 1597).
The partly completed machinery furthermore complies with the provisions of the following UK Statutory Instruments:
UK Statutory Instruments: 2016 No. 1091, 2012 No. 3032
Designated Standards:
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled in accor-
dance with Annex VII (part B) and will be electronically transmitted to national authorities in response to a reasoned
request.
The partly completed machine must not be put into service until the final machinery into which it is to be incorporated
has been declared in conformity with the provisions of the The Supply of Machinery (Safety) Regulations 2008 (2008
No. 1597), where appropriate.
Kaegiswil, 11/23/2023
Air Heater
LHS 210 SF(-R) (HT), DF(-R) (HT),
LHS 410 SF(-R) (HT), DF(-R) (HT)
2014/30/EU, 2011/65/EU
EN ISO 12100, EN 60335-1, EN 60335-2-45, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN IEC 63000
Bruno von Wyl, CTO
Air Heater
LHS 210 SF(-R) (HT), DF(-R) (HT),
LHS 410 SF(-R) (HT), DF(-R) (HT)
EN ISO 12100, EN 60335-1, EN 60335-2-45, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN IEC 63000
Bruno von Wyl, CTO
Pascal Bösch, VP R&D
Pascal Bösch, VP R&D
19