Eaton TRIPP LITE Serie Manual Del Propietário página 2

Product Features
• For use with Mac OS and Windows host computers via either Thunderbolt 3 or
Multi-Function DisplayPort (MFDP) USB-C ports (product features vary based on
port type, see Specifications Table for exact product features).
• Thunderbolt 3 input port supports data transfer rates up to 40 Gbps when used
with a Thunderbolt 3-enabled host computer; data transfer rates up to 26.2 Gbps
are supported via a MFDP-enabled host computer.
• Included 120W DC power supply provides up to 20V 3A (60W) to the host device.
• MTB3-DOCK-03INT includes 120W DC power supply with AUS, EU, UK and US
plugs for international use.
• Thunderbolt 3 output port supports daisy-chaining up to six devices with source
capability of 15W (5V 3A), and supports Thunderbolt 3-enabled devices such as
monitors, RAID memory and more*.
• DisplayPort connector supports 4-Lane DP1.4 video resolutions up to 8K
(7680 x 4320) @ 30 Hz when used with a Thunderbolt 3-enabled host computer
and 2-Lane DP1.4 video resolutions up to 4K (3840 x 2160) @ 60 Hz via a
MFDP-enabled host computer (requires DP1.4 Alt Mode)**.
• Supports DisplayPort Multi-Stream Transport (MST) Mode to allow two displays
to be connected, one to the Thunderbolt 3 output port and a second to the
DisplayPort connector for combined resolutions of 8K @ 30 Hz + 4K @ 30 Hz, or
dual 4K @ 60 Hz.
Note: See Multi-Monitor Requirements for details.
• RJ45 port supports Gigabit Ethernet speeds to connect to a wired network.
• Includes two USB 3.2 Gen 2 Type-A ports, both of which support 10 Gbps data
transfer speeds. One USB-A port supports charging speeds up to 5V 1.5A and the
other supports charging up to 5V 900mA.
• Includes one USB 3.2 Gen 2 Type-C port that supports 10 Gbps data transfer
speed and USB charging up to 5V 1.5A.
• Includes one 3.5 mm audio jack for stereo audio with auto-detection and auto-
switching between OMTP and CTIA.
• SD 4.0 and Micro SD 4.0 slots are available for memory cards. Both can be used
simultaneously.
• Plug-and-play; drivers are automatically downloaded and installed during the initial
dock connection with the host computer.
Note: The host must have administrative access for the drivers to install automatically. If this is
not possible, the drivers can be downloaded manually via the product's webpage at
Tripplite.Eaton.com.
*Only applies to Thunderbolt 3 devices, USB Type-C devices are not supported in the chain.
** If using a USB-C host device that only supports DP 1.2 Alt Mode instead of DP 1.4, the
maximum video resolution supported is 4K/30 Hz.
2