Nilfisk FM400 H Instrucciones De Uso página 82

TROUBLESHOOTING
SWIRLS ON THE FLOOR AFTER SCRUBBING
• Floor not clean.
• Incorrect solution.
• Area not properly swept - debris in pad or brush.
• Improper pad or brush for the job.
• Moving the machine too fast.
SWIRLS ON THE FLOOR AFTER DRY BUFFING
• Moving the machine too fast.
• Floor fi nish too soft.
• Area not properly swept - debris in pad or brush.
• Improper pad or brush for the job.
CIRCLES ON THE FLOOR
• Machine standing still while the brush or pad is running.
FLOOR FINISH REMOVED
• Improper pad... too aggressive.
• Solution too strong.
MACHINE WOBBLES DURING OPERATION
• Defective pad... one side is more dense than the other.
• Machine left sitting on brush or pad for extended period of time causing bristles or pad to "take a set".
• Pad not "seated" properly into pad holder bristles.
• Warped block on brush or padholder - replace.
MACHINE DOES NOT RUN
• Check plug for proper connection - on machine and at wall outlet.
• Check building circuit breaker.
• Call for service.
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Model Number
Electrical
Pad/Brush Speed
Pad/Brush Size
Total Weight (w/cord)
Sound Pressure Level (ISO 11201)
Vibrations at the Hand Controls (ISO 5349-1)
Protection Grade
Protection Class
Type
Aluminum
Electrical / motors / engines - misc
Ferrous metals
Harnesses / cables
Liquids
Plastic - non-recyclable
Plastic - recyclable
Polyethylene
Rubber
revised 2/11
FM400 L
56380056 / 56380057
1.1kW - 230V/50Hz
167 rpm
17" (43 cm)
82 lbs (37.3 kg)
59dB LpA, 3KpA
.42 m/s
IPX4
Material Composition and Recyclability
% of machine weight
FM400 H
56380058 / 56380060
1.5kW - 230V/50Hz
400 rpm
17" (43 cm)
87 lbs (39,5 kg)
62dB LpA, 3KpA
.65 m/s
2
IPX4
% recyclable
19% 100%
55% 86%
9% 100%
9% 43%
0% 0%
5% 0%
0% 0%
0% 0%
4% 0%
FORM NO. 56041821 - FM400 L / FM400 H / FM400 D - 81
FM400 D
56380061 / 56380062
1.1kW / 1.5kW - 230V/50Hz
180 / 360 rpm
17" (43 cm)
88 lbs (40 kg)
61dB LpA, 3KpA
.29 m/s / .48 m/s
2 2
IPX4
2