Descargar Imprimir esta página

Angelo Po 2N1FAGF Manual De Uso página 58

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
Faults
The pilot light goes out.
The fl ame is yellow.
Burner control knob is stiff .
The heating elements do not
come on
The burner does not light or
goes out suddenly.
28
Causes
The thermocouple has not
warmed up enough.
Burner dirty.
Gas control valve malfun-
ction.
Electrical connection not
made correctly
Switch faulty
Safety thermostat tripped
(Oven).
Thermocouple malfunction.
Safety thermostat
malfunction (Oven).
Remedies
Make more attempts to light
the fl ame.
Clean the burner.
NOTE: Contact the
after-sales service.
Check the connection of the
electrical wires.
NOTE: Contact the
after-sales service.
Replace the switch.
NOTE: Contact the
after-sales service.
Reset the safety thermostat (see
page 23), if the problem persists,
call the after-sales service.
NOTE: Contact the
after-sales service.
NOTE: Contact the
after-sales service.
3301360_ut_GB_rev.2
FAULT

Publicidad

loading

Este manual también es adecuado para:

2t1fagf