Descargar Imprimir esta página

GreenWorks Pro GPW2300 Manual Del Operador página 10

Ocultar thumbs Ver también para GPW2300:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
Before you change the spray tip:
1. Pull the spray gun trigger to release water pressure.
2. Engage the trigger safety lock-out on the spray gun.
3. Stop the mahcine.
Do not point the spray wand at your face or others'.
4.3.1
NOZZLE TYPE
SPRAY TIP
APPLICATION
Yellow - Narrow fan tip (15° )
15
O
Green - Narrow fan tip (25° )
25
O
White - Wide fan tip (40° )
40
O
Black - Soap spray tip
SOAP
WARNING
WARNING
The yellow pressure washer tip pro-
vides high versatility with its 15 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
The green pressure washer tip pro-
vides high versatility with its 25 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
The white 40 degree tip, referred to
as the "fan" tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
The black soap spray tip, is used for
soap application. Soap is applied un-
der low pressure high volume for op-
timum performance. Soap cannot be
applied under high pressure with this
machine.
English
SPRAY TIP
4.3.2
INSTALL THE SPRAY TIP
1. Pull back the quick-connect collar (29) on the spray wand
(5).
2. Insert the spray tip (28) onto the spray wand (5).
3. Release the quick-connect collar (29) to attach the spray
tip (28).
4. Pull on spray tip (28) to ensure it is properly installed and
does not pull out.
4.4
ADD DETERGENT
6
Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
Do the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
10
APPLICATION
Turbo nozzle tip
The nozzle rotates in a zero to 15 de-
gree spray pattern in a circular mo-
tion to break down tough dirt and
grime. The spray pattern can cover
area of 4 to 8 inches wide, depending
on a distance between the tip and the
surface being cleaned.
WARNING
WARNING
NOTE

Publicidad

loading