TOPDON ArtiDiag Serie Manual Del Usuario página 12

Note: Make sure the ignition is always OFF before plugging in the
unit.
3.3 Turn the Ignition to the "ON" Position (see Figure 3-7)
If your vehicle is equipped with a keyless start system and the
ignition switch is an "Engine Start Stop" button (see Figure 3-8),
press the "Engine Start Stop" button until the car is in "ON" mode.
Do not apply the brake while pressing the "Engine Start Stop"
button, or you will start the car instead of putting it in the "ON"
position.
The method of ignition varies by vehicle model. Refer to the
vehicle's service manual for details.
Your are now ready to start diagnosing the vehicle.
Figure 3-6
Figure 3-7
ENGINE
START
STOP
Figure 3-8
9