TOPDON ArtiDiag Serie Manual Del Usuario página 20

Button Description
Report - tap to save the DTCs in report format. (To view the saved
reports, go to Folder > Reports > Fault Code Report.)
Clear DTCs - tap to clear all the DTCs retrieved.
Clear Trouble Code
1. After the vehicle is identified, select the system for which you wish to
clear DTCs from the system menu.
2. Tap Clear Trouble Code in the function menu.
3. Tap OK when the DTCs are cleared.
Note:
1. The procedure of clearing DTCs should be performed after the
required repair has been completed. Once confirmed, DTCs and
freeze data stored in the ECU will be cleared.
2. DO NOT START UP THE ENGINE WHILE CLEARING DTCS.
Live Data
1. After the vehicle is identified, select the system for which you wish to
read the data stream from the system menu.
2. Tap Live Data in the function menu. A data stream list displays.
Figure 4-7
17