TOPDON ArtiDiag Serie Manual Del Usuario página 24

I/M Readiness
This function checks whether or not the various emission-related
systems on the vehicle are operating properly, and are ready for I/M
testing.
It can also check the monitor running status and to confirm if the
repair of a car fault has been performed correctly.
Live Data
This function displays the real-time live data and parameters from the
vehicle's ECU.
On-Board Monitor
This function displays the test results for emission-related powertrain
components and systems that are not continuously monitored.
Component Test
This function helps send control commands to the vehicle's ECU as a
way to test and operate the system parts and components.
Vehicle Information
This function displays a list of information (provided by the vehicle
manufacturer) from the vehicle's ECU.
The information may include:
• VIN.
• Calibration ID (CID).
• Calibration Verification Number (CVN).
• In-use Performance Tracking for Spark Ignition Engine (IUPR)
• ECU Name
Vehicle Status
This function displays the status of the vehicle, including Engine,
Transmission, Codes Found, MIL Status, Monitors and Protocol.
4.3.2 Diagnostic Feedback
The ArtiDiag500/ArtiDiag600 allows you to instantly send diagnostic
feedback (with logs of diagnostic data automatically attached)
while you are encountering a software problem with the diagnostics
operations.
To send diagnostic feedback:
1. Tap the icon located at the top right corner of any screen
with this icon.
21