Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-six HIDDEN CAMS (1F) into the ENDS (A and B),
å
UPRIGHTS (C and D), BOTTOM (F), and SHELVES (G and H).
Then, insert the metal end of a CAM DOWEL (2F) into each
HIDDEN CAM, except the long edges of the ENDS (A and B).
Do not insert CAM
DOWELS into these edges.
Hole
The arrow in the
HIDDEN CAM
must point toward
the hole in the
edge of the board.
C
www.sauder.com/services
Do not tighten the HIDDEN CAMS in this step.
A
Arrow
G
D
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
H
Arrow
(26 used)
1F
2F
(20 used)
414783
Arrow
1F
F
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Page 5
Publicidad
