KAYAK
User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade
4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres/12 inches inclusive, with
occasional waves up to 0.5 metres/20 inches of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or qualifi ed instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your ve-
ssel and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of Specifi cations
(indicative values)
Length (cm) [ft.-in.]
Width (cm) [ft.-in.]
Number of air chambers
Diameter of side tubes (cm) [in.]
Dimensions – packed in carry bag (cm) [in.]
Dimensions – packed in cardboard (cm) [in.]
Max. operating pressure – side tube
Max. operating pressure – bottom
Max. operating pressure – seat
Weight (kg) [lbs.]
Load (kg) [lbs.]
Maximum number of people
Draught (cm) [in.]
The highest anchor above surface (cm) [in.]
2. Technical Description
– See Picture 1
1 Sidewall cylinder
2 Bottom
3 Push/push valve
– for infl ating/defl ating the kayak, regulating pressure
and measuring pressure using a manometer
4 Manufacturer's label
5 Yellow "warning" label
6 Seat with a backrest
7 Front footrest
8 Deck
9 Handgrip
10 Drain hole
8
RUSH 1/024
Table of Contents:
1. Table of Specifi cations
2. Technical Description
3. Infl ation Instructions
4. Using the Boat
5. Storage of the Boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairs
9. Product Disposal Method
10. Packaging Disposal Method
11. Manufacturer's Label
– legend of symbols used
12. Safety Caution
RUSH 1
355 [11-8]
81 [2-8]
3 + 1
20 [7.9]
65 × 40 × 28 [26 × 16 × 11]
70 × 44.5 × 31 [28 × 18 × 12]
0.025 MPa [0.25 Bar / 3.75 PSI]
0.05 MPa [0.5 Bar / 7.2 PSI]
0,02 [0,2 Bar / 3 PSI]
12 [26.5]
150 [331]
1
15 [6]
40 [16]
11 Holes for the use of a rudder
12 Safety rope attachment
13 Safety rope
14 Metal reinforcement attachment
15 Seat and baggage attachment (on the bottom)
16 Backrest and footrest attachment
17 Footrest strap attachment
18 Strap with velcro for attachment of the cover deck
(special accessory, can be purchased)
19 Directional fi n attachment
20 Keel
21 Reinforcement of the keel bottom section with a mem-
brane
22 Elastic rope with a snap-hook
VERSION 2/2024
EN
Page 8
8
9
9
10
10
10
10
10
10
10
11