Descargar Imprimir esta página

LawnMaster CLMF4841E Manual De Instrucciones página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ASSEMBLY
Assembly Preparation
includes suitable personal protective equipment.
WARNING
If any parts are damaged or missing do not operate this product until the parts are replaced.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with this
WARNING
Do not connect the battery and/or the isolator key before the product is completely assembled.
WARNING
operate the mower with damaged safety devices. Failure to pay attention to this warning can result
assembly.
Assembling the Lower Handle (See Fig. 1)
the markings
operating position. There are three possible positions
clockwise to tighten (Fig. 1).
Assembling the Upper Handle (See Fig. 2)
Rotate the wing knobs clockwise to tighten (Fig. 2).
1 ) on the lawnmower housing as shown. Make sure
) over the bolt, followed by the wing knob. Rotate the wing knobs
2
17
(Fig .1).

Publicidad

loading