ASSEMBLY
NOTE:
This mulching plug prevents grass from being collected by blocking the collection chute. This allows
nutrient for the lawn.
To install the mulching plug:
discharge chute. Ensure that the locking latch snaps into place (Fig. 8 & 9).
To remove the mulching plug:
the mulching plug up and out of the discharge chute.
Installing and Removing the Battery Packs (See Figs. 10-11)
WARNING
If any parts are broken or missing, do not attempt to attach the battery packs to the mower or
operate the mower until the broken or missing parts are replaced. Failure to do so could result in
NOTE: Both batteries should be installed into the compartments in order to start the mower.
To install the battery packs:
pack, and then insert the battery packs into the compartment (Fig. 10).
NOTE:
starting operation.
To remove the battery packs:
battery compartment. Remove the second battery in the same way (Fig. 11).
19