Descargar Imprimir esta página

LawnMaster CLMF4841E Manual De Instrucciones página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

OPERATION
General Operation
Check the product and accessories for damage before each use. Before use, ensure all power
connections are in good working order prior to installing batteries and the isolator key. If damage
is present or observed, stop and have mower serviced before use. Do not use the product if it is
damaged.
brush. Blocked air vents may lead to overheating and damage to the product.
the working area.
mulching plug.
have full control over the product.
Mowing (See Fig. 17)
proper discharge of the clippings.
roughly 6cm long, the grass should not be shorter than 4cm once mowed. If the grass is higher,
you should gradually cut it down to the desired length so as not to damage the grass. Cutting
grass that is too long will result in poor collection performance and may overload the motor.
clippings.
and any other accumulated debris.
Mowing on slopes requires extra caution. If you feel uneasy on a slope, do not mow it. For your
safety, do not attempt to mow slopes greater than 15 degrees.
direction on slopes.
tripped over or thrown by the blade.
are losing your balance, release the switch lever immediately.
24

Publicidad

loading