Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
To set the cutting height:
its current setting, and then move it towards the back of the mower and engage the lever in the
desired cutting height position (Fig. 12).
its current setting, and then move it towards the front of the mower and engage the lever in the
desired cutting height position (Fig. 12).
Battery Pack Operation
Battery Charging
WARNING
Ensure the batteries are charged between 4°C and 40°C. This ensures an optimum battery service
life.
Protect the batteries from heat, from continuous exposure to sun and keep away from radiation or
other heat sources. Do not leave the batteries in the mower in direct sunlight over long periods.
The batteries are supplied partially charged. To ensure full capacity of each battery, charge the
any time without reducing their service life. Interrupting the charging procedure does not affect the
batteries.
Battery LED Indicators
The battery is equipped with a charge-level indicator panel which indicates its charge condition.
This charge-level indicator panel consists of 4 LEDs on the battery. Press and hold the charge
indicator button on the battery to actuate the charge level indicator. The charge level indicator
LEDs go out after releasing the button. The battery charge level can be checked either when the
LED Indicators on Battery
(Continuous lighting)
4 LEDs (inc 2 green)
3 LEDs (inc 1 green)
2 LEDs (orange & red)
1 LED (red only)
Battery Capacity
Fully charged
21
Indicator Lights
button
red
green
orange
Publicidad
