Parkside PHPA 4 A1 Traduccion Del Manual De Instrucciones Originale página 31

WARNING!
■ Never operate the charger with a damaged power cord
or power plug. A damaged power cord causes danger to
life by electric shock.
Before initial operation
Charging the appliance
Only for indoor use!
NOTE
► The battery is supplied partially charged. Before first use,
charge the battery for at least 3 hours. Li-ion batteries can
be charged at any time without adversely affecting their
service life. Interruption of the charging process will not
damage the battery.
■ Never charge the appliance when the ambient temperature is
below 10°C or above 40°C.
Start charging:
♦ Connect the mains adapter
100 - 240 V ~ 50/60 Hz power source.
♦ Place the cordless hot glue gun onto the charging cradle
The battery charge level indicator
Stop charging:
♦ The battery charge level indicator
charging process is complete and the cordless hot glue gun is
ready for use.
♦ Remove the cordless hot glue gun from the charging cradle
♦ Disconnect the mains adapter
│ GB │ IE
■ 28
to a
lights up red.
turns green as soon as the
from the power supply.
.
.
PHPA 4 A1